All equipment listed is subject to availability and prices are subject to change without notice

D7G Auto 400 Welder Tractors

Written by cefar on June 11, 2013. Posted in Welder Tractors, Welding Support Equipment

welder tractors

 

PDF – D7G Auto 400 Welder Tractors

·       Four (4) Lincoln Idealarc DC-400 rectifier welders.
·       Newage alternator with low frequency shut off.
·       Quincy 390 compressor – Electric motor – 2 stage.
·       120 gallon air receiver.
·       Four (4) 60 hz 110 volt electrical outlets.
·       Hydraulically controlled lead boom – 1,000 pounds capacity 14 foot from center line of tractor.

D6E Auto 400 Welder Tractor

Written by cefar on June 11, 2013. Posted in Welder Tractors, Welding Support Equipment

Screen shot 2013-06-10 at 9.45.28 PM

 

PDF – Auto 400 Welder Tractor

·       Four (4) Lincoln Idealarc DC-400 rectifier welders (Miller XMT 350 welders optional).
·       Newage alternator with low frequency shut off.
·       Quincy 350 compressor – Electric motor – 2-stage.
·       120 gallon air receiver.
·       Four (4) 60 hz 110 volt electrical outlets.

D6D Auto 400 Welder Tractor

Written by cefar on June 11, 2013. Posted in Welder Tractors, Welding Support Equipment

Screen shot 2013-06-10 at 9.42.57 PM

 

PDF – D6D Auto 400 Welder Tractor

Four (4) Lincoln DC-400 welders .
·       Alternator with low frequency shut off.
·       350 compressor
·       120 gallon air receivers
·       Four (4) electrical outlets

Auto Pac Welder Package

Written by cefar on June 11, 2013. Posted in Welder Tractors, Welding Support Equipment

Screen shot 2013-06-10 at 9.40.59 PM

 

PDF – Auto Pac Welder Package

Features:
·       Can be easily installed in the field; mostly bolt-on.
·       Available for any suitable make or model of tractor (minimum 140 h.p.)
·       Can be shipped in a container or crated as break-bulk.

Auto Pac 400 Welder Package

Written by cefar on June 11, 2013. Posted in Welder Tractors, Welding Support Equipment

Screen shot 2013-06-10 at 9.38.31 PM

 

PDF – Auto Pac 400 Welder Package

This welder arrangement can be installed on a Cat D6D, D6E, Dressta TD15, TD20 or Komatsu D85 tractor.

Challenger Auto 400 Welder Tractor

Written by cefar on June 11, 2013. Posted in Welder Tractors, Welding Support Equipment

Screen shot 2013-06-10 at 9.36.29 PM

 

PDF – Challenger Auto 400 Welder Tractor

This welder arrangement  is designed for the Cat Challenger CH65, CH70, CH75 and CH85.
The Caterpillar Tractors feature:
·       Mobil-Trac Undercarriage. Rubber tracks for on or off road travel.
·       Differential steering. Full power and spin turns.
·       18 MPH travel speed.
·       300 hp

Combo Tractor Welder/Pipelayer

Written by cefar on June 11, 2013. Posted in Welder Tractors, Welding Support Equipment

Screen shot 2013-06-10 at 9.34.07 PM

 

PDF – Challenger Combo Tractor

SL3CH HYDRAULIC PIPELAYER ATTACHMENT:

  • Two (2) hydraulic planetary winches.
  • 15 foot boom.
  • Two (2) speed load line.

WELDER PACKAGE

  • Four (4) welding machines.
  • Newage alternator (100 kw).
  • Low frequency shut off.
  • Quincy 350 compressor with 120 gallon tank.
  • Six (6) electrical outlets.
  • Bottle rack for 6 bottles
  • Two (2) storage boxes with locking latch

Welder Loader Tractor

Written by cefar on June 11, 2013. Posted in Welder Tractors, Welding Support Equipment

Screen shot 2013-06-10 at 9.32.13 PM

 

PDF – Challenger Welder/Loader Tractor

WELDER PACKAGE

  • MobiArc 200 amp DC welding machine.
  • Leece Neville 200 amp DC alternator.
  • Safety shutoff and system protection built in.
  • Powerite 3000 watt DC/AC inverter with digital display
  • Four (4) AC electrical outlets.
  • Mounted in weatherproof locking box
  • Rugged welding cable reel.

Caterpillar Loader Features:

  • Rubber tire for on and off road travel.
  • 2 wheel drive or 4 wheel drive.
  • 20 MPH travel speed
  • 416 loader — 77 horsepower.
  • 420 loader — 88 horsepower.
  • Heated cab-ROPS

Features:

  • Versatility and top quality performance.
  • No surging during welding process.
  • The right welder for every specification.
  • Compact and rugged in one package.
  • Solid state circuitry.
  • Built within the width of the standard machine.

Lincoln Vantage 500

Written by cefar on June 11, 2013. Posted in Welder Tractors, Welding Support Equipment

Screen shot 2013-06-10 at 9.29.42 PM

 

PDF – Vantage 500

Setting A New Standard! If you are looking for a rugged, reliable and capable welder for demanding construction, rental fleet or repair applications, take a close look at the Vantage 500. Standardstainless steel roof and side panels, simple controls and Chopper Technology™deliver the low maintenance, long service life, easy operation and great arc performance every owner appreciates. This multi-process powerhouse features 500 amps at 100% duty cycle, or 575 amps at 50%. Don’t pay extra for plenty of AC auxiliary power – 12,000 watts while welding up to 250 amps is standard. Select the 48 horsepower oil/air-cooled Deutz engine or the 56 horsepower water-cooled Cummins engine. Either way, you can depend on legendary engine reliability from well-known brands and superior Lincoln arc performance.

Miller XMT Series Welder

Written by cefar on June 11, 2013. Posted in Welder Tractors, Welding Support Equipment

Screen shot 2013-06-10 at 9.27.45 PM

 

PDF – Miller XMT Series Welder

Processes 
MIG (GMAW)/Pulsed MIG (GMAW-P)*
Stick (SMAW)
TIG (GTAW)/Pulsed TIG (GTAW-P)*
Flux Cored (FCAW)
Air Carbon Arc Cutting and Gouging
(CAC-A)
*With optional controls only —
not available with XMT 350 VS model.
Input Power
304/350:Requires 3- or 1-Phase Power
456:Requires 3-Phase Power

Output Power 
304:10–35 V, 5–400 A
350:10–38 V, 5–425 A
456:10–38 V, 5–600 A
Weight
304:Net: 79.5 lb (36.1 kg)  Ship: 88.6 lb (40.2 kg)
350:Net: 80 lb (36.3 kg)  Ship: 89.1 lb (40.4 kg)
456:Net: 118 lb (53.5 kg)  Ship: 129 lb (58.5 kg)

Heavy Industrial Applications 
Construction
Shipbuilding
Railroad
Truck/Trailer Manufacturing
Fabrication
Repair Shops
Rental Fleets
Quick
Specs

Screen shot 2013-06-11 at 3.51.03 PM Screen shot 2013-06-11 at 3.51.14 PM