PDF - AutoPac Welder Package

Standard Package Includes:

• Four (4) Lincoln Idealarc DC-400 rectifier welders.
• Newage alternator with low frequency shut off.
• Quincy 350 compressor—Electric motor-2 stage.
• 120 gallon air receiver
• Four (4) 60 hz 110 volt electrical outlets.
• Hydraulically controlled lead boom-1,000 pounds capacity 14 foot from centerline of tractor.

• Can be easily installed in the field; mostly bolt-on.
• Available for any suitable make or model of tractor (minimum 140 h.p.).
• Can be shipped in a container or crated as break bulk.

PDF - Lincoln DC400 Welder

Performance:

• 400 amp output at 100% duty cycle (each welder).
• Current range 6-500 amps.

PDF - Challenger Combo Tractor

SL3CH HYDRAULIC PIPELAYER ATTACHMENT:

• Two (2) hydraulic planetary winches.
• 15 foot boom.
• Two (2) speed load line.  

• Four (4) welding machines. 
• Newage alternator (100 kw).  
• Low frequency shut off.
• Quincy 350 compressor with 120 gallon tank.
• Six (6) electrical outlets.
• Bottle rack for 6 bottles
• Two (2) storage boxes with locking latch

PDF - Challenger Welder/Loader Tractor

WELDER PACKAGE

• MobiArc 200 amp DC welding machine.
• Leece Neville 200 amp DC alternator.  
• Safety shutoff and system protection built in.
• Powerite 3000 watt DC/AC inverter with digital display
• Four (4) AC electrical outlets.
• Mounted in weatherproof locking box
• Rugged welding cable reel.

• Rubber tire for on and off road travel.
• 2 wheel drive or 4 wheel drive.
• 20 MPH travel speed
• 416 loader — 77 horsepower.
• 420 loader — 88 horsepower.
• Heated cab-ROPS

• Versatility and top quality performance.
• No surging during welding process.
• The right welder for every specification.
• Compact and rugged in one package.
• Solid state circuitry.
• Built within the width of the standard machine.

PDF - Vantage 500

Setting A New Standard!
If you are looking for a rugged, reliable and capable welder for demanding construction,
rental fleet or repair applications, take a close look at the Vantage 500. Standardstainless
steel roof and side panels, simple controls and Chopper Technology™deliver the low
maintenance, long service life, easy operation and great arc performance every owner
appreciates. This multi-process powerhouse features 500 amps at 100% duty cycle, or
575 amps at 50%. Don’t pay extra for plenty of AC auxiliary power – 12,000 watts while
welding up to 250 amps is standard. Select the 48 horsepower oil/air-cooled Deutz engine or
the 56 horsepower water-cooled Cummins engine. Either way, you can depend on legendary
engine reliability from well-known brands and superior Lincoln arc performance.

PDF - Miller XMT Series Welder

Processes
MIG (GMAW)/Pulsed MIG (GMAW-P)*
Stick (SMAW)
TIG (GTAW)/Pulsed TIG (GTAW-P)*
Flux Cored (FCAW)
Air Carbon Arc Cutting and Gouging
(CAC-A)
*With optional controls only —
not available with XMT 350 VS model.

Input Power
304/350:Requires 3- or 1-Phase Power
456:Requires 3-Phase Power

Output Power
304:10–35 V, 5–400 A
350:10–38 V, 5–425 A
456:10–38 V, 5–600 A

Weight
304:Net: 79.5 lb (36.1 kg)  Ship: 88.6 lb (40.2 kg)
350:Net: 80 lb (36.3 kg)  Ship: 89.1 lb (40.4 kg)
456:Net: 118 lb (53.5 kg)  Ship: 129 lb (58.5 kg)

Heavy Industrial Applications
Construction
Shipbuilding
Railroad
Truck/Trailer Manufacturing
Fabrication
Repair Shops
Rental Fleets
Quick
Specs

PDF - Pipe Facing Machine

• Two sets of hydraulically operated clamping shoes which simultaneously expand with equal pressure to secure the pipe for the beveling process. 
• Hydraulically operated rotating faceplate which secures up to six radial arms, which contain carbide tip cutting tools. 
• The cutting tools may be set to a variety of ranges. 
• One skilled operator may produce a useable bevel in approximately 3 to 5 minutes depending on the wall thickness of the joint of pipe.