All equipment listed is subject to availability and prices are subject to change without notice

Vaculift RC 40D Plant Pipe Lifter

Written by cefar on June 11, 2013. Posted in Low ground pressure trailers and pipe handling equipment

Screen shot 2013-06-10 at 10.12.15 PM

 

PDF – Vaculift RC 40D Plant Pipe Lifter

Advantages
FAST, SAFE, COST EFFECTIVE! 

1. It’s much faster than using pipe hooks, pipe forks, or pipe tongs.
2. It doesn’t damage the bevels on the end of the pipe or the coating, which in turn eliminates repair
cost due to handling.
3. It reduces or eliminates the need for men on the ground, thus cutting the cost per pipe joint handled.
4. It is the safe way to handle pipe.  With no one close to the pipe when it’s moved, injuries to men on
the ground are eliminated, and the cost of insurance and workman’s compensation is reduced.

Vaculift RC 10 Pipe Lifter

Written by cefar on June 11, 2013. Posted in Low ground pressure trailers and pipe handling equipment

Screen shot 2013-06-10 at 10.10.18 PM

 

PDF – Vaculift RC10 Pipe Lifter

Features
Fully self contained tank-beam unit can be hooked up in a matter of seconds.  A 360 degree rotator, which is standard for excavator use, is powered by the excavator’s bucket curl circuit.

Note:  Line pipe can be steel, concrete, plastic, cast-iron etc.

Capacity 
10,000 kg (22,000 lbs.)   Pipe from 10 cm (4”) to unlimited size
diameter, single or double joints.
Carrier 
Hydraulic excavator, wheel or track type loader, crane or pipe-
layer.  NOTE:  The rotator is not recommended for use with a
crane or pipelayer.

Vaculift RC 12 Pipe Lifter

Written by cefar on June 11, 2013. Posted in Low ground pressure trailers and pipe handling equipment

Screen shot 2013-06-10 at 10.07.14 PM

 

PDF – Vaculift RC12 Steel Pipe Lifter

Features

Fully self contained tank-beam unit can be hooked up in a matter of seconds.  A 360 degree hydraulic rotator, which is standard for excavator use, is powered by th excavator’s bucket curl circuit.  Operation is electronic by remote control.  However a wired-control is availab.  Quick fittings for easy pad change.  Only the suction pad(s) must be changed to switch to a different pipe diameter.  Note:  Line pipe can be steel, concrete, plastic, cast-iron, etc.

Capacity 
12,000 kg (26,000 lbs.)   Pipe from 10 cm (4”) to unlimited size
diameter, single or double joints.
Carrier 
Hydraulic excavator, wheel or track type loader, crane or pipe-
layer.  NOTE:  The rotator is not recommended for use with a
crane or pipelayer.

Also available:

RC16 – 16,000 kg (35,200 lbs.) capacity
RC20 – 20,000 kg (44,000 lbs.) capacity

Prime Mover

Written by cefar on June 11, 2013. Posted in Low ground pressure trailers and pipe handling equipment

prime mover

 

PDF – Prime Mover

High horsepower tractor with positive drive belts for superior drive, traction and stopping.

  • More traction and stability than a wheel machine, yet able to travel on paved roads.
  • 410 horsepower plus—depending on engine used.
  • Differential steering — provides continuous power to both track belts, even in a turn.
  • Power shift transmission, with inching foot pedal, 10 forward speeds and two in reverse.
  • Extremely maneuverable—can turn in its own length.
  • Very mobile—capable of speeds up to 18 mph.
  • Economical—rubber belts outlast tires.

Pipe Handling Roli Cradles

Written by cefar on June 11, 2013. Posted in Low ground pressure trailers and pipe handling equipment

roli cradles

 

PDF – Pipe Handling Challenger Roli Cradles

Features of the Challenger Roli Cradles 

●Contoured urethane rollers.
▪3.75 inch diameter 6-12 and 12-24).
▪9.25 inch diameter (24-36, 36-48 and 48-60).
●Even support of the pipe to prevent “egging”.
●High capacity for heavy wall pipe.
●Easy disassembly for transit and storage.
●Individual rollers can be economically replaced.

Pipeline Lined Steel Choker Belt

Written by cefar on June 11, 2013. Posted in Low ground pressure trailers and pipe handling equipment

steel choker belt

 

PDF – Pipeline Lined Steel Choker Belt

Our steel choker belt is high quality built to last.  Completely lined belt allows the exact alignment
of pipe required  for  welding or  bending.  The
steel-lined fabric-faced belt holds the pipe firmly,
no slippage.

Ability to roll or pull pipe makes handling fast and
convenient.  The belt  is easily released when the
pipe is in position.

This bending belt comes in sizes up to 60 inches.
It can be adjust for coating thickness and is
repairable in the field.

Lowering In Belt

Written by cefar on June 11, 2013. Posted in Low ground pressure trailers and pipe handling equipment

lowering in belt

 

PDF – Lowering In Belt

Challenger Services offers lowering in belts for your pipeline.

Choker Sling

Written by cefar on June 11, 2013. Posted in Low ground pressure trailers and pipe handling equipment

choker sling

 

PDF – Choker Sling

Choker slings can be used in many ways for lifting material.

Weight Capacity:     700 lbs.
Dimensions:             72″L X 1″ Thick (other sizes available)
Unit Weight:             2 lbs.

Coupon Cutter

Written by cefar on June 11, 2013. Posted in Low ground pressure trailers and pipe handling equipment

coupon cutter

 

Coupon Cutter

Easy to operate, the Coupon Cutter is constructed of cast aluminum and steel alloy and weighs only 12 pounds. Providing accurate welding quality testing, the Coupon Cutter offers right or left hand operation, centers on a pipe and operates at the rate of six turns per inch of travel. Provides a coupon up to 3 x 4.

Screen shot 2013-06-11 at 3.51.03 PM Screen shot 2013-06-11 at 3.51.14 PM Screen shot 2013-06-11 at 3.51.08 PM